Water Hardness in Sheridan, Wyoming
The water hardness in Sheridan, WY is 200 ppm (11.7 grains per gallon), which is classified as Hard . Water in Sheridan is supplied by City of Sheridan and comes primarily from a blend of surface water and groundwater sources. At this hardness level, a water softener is recommended to protect your plumbing, appliances, and improve daily water quality. Without treatment, hard water at 200 ppm costs the average household an estimated $9 per year in extra expenses.
Water Quality Details for Sheridan, WY
What 200 PPM Means for Your Home in Sheridan
At 200 ppm, Sheridan's water is classified as hard. At this level, scale buildup is a serious concern. You will see heavy white deposits on faucets, showerheads, and inside your kettle. Your water heater is losing efficiency rapidly as scale insulates the heating element — this alone can increase your energy bill by 25 percent or more. Dishwashers leave cloudy residue on glasses, washing machines require extra detergent, and soap scum accumulates quickly in showers and tubs. Skin and hair may feel dry after bathing. A water softener is strongly recommended for Sheridan residents at this hardness level. The investment typically pays for itself within two years through reduced energy costs, lower soap and detergent usage, and extended appliance lifespan.
Water Source and Treatment at City of Sheridan
Sheridan's water is supplied by City of Sheridan and sourced primarily from a combination of surface water and groundwater sources. This blended approach helps the utility balance water quality, availability, and seasonal demand. The 200 ppm hardness in Sheridan reflects the weighted average of these different sources, and actual hardness may fluctuate slightly depending on which sources are active at any given time. The water has a pH of 7.7, which is slightly alkaline, and total dissolved solids of 320 ppm (elevated).
Estimated Cost of Hard Water in Sheridan
The Water Quality Association estimates that hard water costs the average household about 30 cents per grain per gallon per person per year in combined expenses from increased soap and detergent usage, reduced appliance efficiency, higher energy bills from scale-encrusted water heaters, and premature appliance and plumbing replacement. For a typical Sheridan household of 2.5 people with water at 200 ppm (11.7 gpg), this translates to approximately $9 per year. Over 10 years, that adds up to $88 in avoidable costs — often more than the total cost of installing and operating a water softener.
Recommended Treatment Solutions for Sheridan
Based on the water hardness of 200 ppm in Sheridan, the following treatment options are recommended, ranked by effectiveness for your specific hardness level.
Salt-Based Water Softener
$800 - $2,500 Effectiveness: High Removes minerals Learn more →Salt-Free Water Conditioner
$1,000 - $3,000 Effectiveness: Moderate Conditions only Learn more →Reverse Osmosis System
$200 - $500 Effectiveness: High Removes minerals Learn more →Electronic Descaler
$150 - $400 Effectiveness: Moderate Conditions only Learn more →Other Cities in Wyoming
Compare Sheridan's water hardness with other cities in Wyoming. Water hardness can vary significantly within a state depending on local geology and water sources.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Sheridan | 200 ppm | 11.7 | Hard | Mixed |
| Gillette | 280 ppm | 16.4 | Very Hard | Ground |
| Rock Springs | 240 ppm | 14 | Hard | Ground |
| Riverton | 220 ppm | 12.9 | Hard | Ground |
| Casper | 180 ppm | 10.5 | Moderately Hard | Surface |
| Cody | 165 ppm | 9.6 | Moderately Hard | Surface |
| Laramie | 150 ppm | 8.8 | Moderately Hard | Mixed |
| Cheyenne | 125 ppm | 7.3 | Moderately Hard | Mixed |
Test Your Water for Accurate Results
The hardness value shown for Sheridan (200 ppm) is based on the most recent available data from City of Sheridan. Your actual water hardness may vary depending on your neighborhood, the age of your plumbing, and seasonal changes in water supply. For the most accurate measurement, we recommend testing your tap water with a home test kit or requesting a current water quality report from City of Sheridan. Visit our hardness scale guide to understand what your test results mean, or explore all treatment solutions to find the right option for your home.