Water Hardness in Chesapeake, Virginia
Does Chesapeake have hard water?
Mildly. The water is slightly hard, which most households never notice.
City of Chesapeake Public Utilities delivers water at 75 ppm (4.4 grains per gallon), which this site rates Slightly Hard and the USGS classifies as moderately hard (61–120 mg/L as calcium carbonate). That is 10 ppm softer than the Virginia average of 85 ppm, and softer than 69% of the 428 cities listed on this site.
75 PPM in Every Unit
Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Chesapeake reading expressed in each one.
| Unit | Chesapeake | Used by |
|---|---|---|
| mg/L as CaCO₃ (ppm) | 75 | Utility water-quality reports, USGS |
| Grains per gallon (gpg) | 4.4 | Softener sizing, most US dishwasher manuals, test strips |
| German degrees (°dH) | 4.2 | European-made dishwashers and coffee machines |
| French degrees (°fH) | 7.5 | Some filter and descaler instructions |
| mmol/L | 0.75 | Laboratory reports |
Dishwasher setting for Chesapeake: 4.4 gpg or 4.2 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.
What 75 PPM Does in a Chesapeake Home
At 75 ppm you may see faint spotting on glassware and a film on shower glass over months, but the plumbing and appliances are not at risk. A rinse aid in the dishwasher usually settles it; a softener is a comfort purchase here, not a protective one.
Water heaters
The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Chesapeake's 4.4 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.
| Appliance | Battelle finding | At 4.4 gpg |
|---|---|---|
| Gas storage heater, 50 gal hot water/day | 4% efficiency loss per 5 gpg over 15 years | 4% loss |
| Gas storage heater, 100 gal/day | 8% per 5 gpg, capped at the 48% measured at 30 gpg | 7% loss |
| Electric storage heater | 0.4 lb of scale per year per 5 gpg | 0.4 lb/year |
| Tankless gas heater | Plugged with scale after 1.6 years on 26 gpg water | Low risk |
| Showerheads | Lost 75% of flow in under 18 months on hard water | Occasional vinegar soak |
Laundry and dishes
Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Chesapeake: The label's standard dose is enough; extra detergent will not rinse out any better.
Sizing a Water Softener for Chesapeake
Softener capacity is the grains of hardness a unit removes between regenerations. At 4.4 gpg, each person using 75 gallons a day adds about 330 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.
| Household | Grains/day | Grains/7 days | Suggested capacity | Salt/month |
|---|---|---|---|---|
| 2 people | 660 | 4,620 | 24,000 grain | ~34 lb |
| 3 people | 990 | 6,930 | 24,000 grain | ~34 lb |
| 4 people | 1,320 | 9,240 | 24,000 grain | ~34 lb |
| 5 people | 1,650 | 11,550 | 24,000 grain | ~34 lb |
Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.
Where Chesapeake's Water Comes From
City of Chesapeake Public Utilities supplies Chesapeake from surface water (rivers, lakes and reservoirs). Surface water has little contact with mineral-bearing rock, so its hardness mostly reflects the watershed's geology and tends to run lower and steadier than well water.
The supply has a pH of 7.3, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 115 mg/L, well under the EPA secondary standard of 500 mg/L. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.
The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.
Treatment Options for 75 PPM
Ranked for Chesapeake's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.
Other Cities in Virginia
Chesapeake ranks 4 of 9 listed Virginia cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Chesapeake | 75 ppm | 4.4 | Slightly Hard | Surface |
| Winchester | 150 ppm | 8.8 | Moderately Hard | Ground |
| Arlington | 110 ppm | 6.4 | Slightly Hard | Surface |
| Richmond | 80 ppm | 4.7 | Slightly Hard | Surface |
| Virginia Beach | 70 ppm | 4.1 | Slightly Hard | Surface |
| Norfolk | 65 ppm | 3.8 | Slightly Hard | Surface |
| Roanoke | 55 ppm | 3.2 | Soft | Surface |
| Charlottesville | 48 ppm | 2.8 | Soft | Surface |
| Lynchburg | 42 ppm | 2.5 | Soft | Surface |
Frequently Asked Questions
Does Chesapeake have hard water?
Mildly. The water is slightly hard, which most households never notice. Chesapeake's water measures 75 ppm (4.4 grains per gallon), which the USGS classifies as moderately hard (61–120 mg/L as calcium carbonate). That is 10 ppm softer than the Virginia average of 85 ppm and softer than 69% of the 428 cities listed on this site.
What is the water hardness in Chesapeake in grains per gallon?
4.4 grains per gallon. The same 75 mg/L reading is 4.2 German degrees (°dH), 7.5 French degrees (°fH) and 0.75 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.
Do I need a water softener in Chesapeake?
Not for protection. At 75 ppm scale builds slowly enough that a rinse aid and an occasional vinegar soak of aerators handle it. People who dislike spotting or have sensitive skin still choose one, and the sizing table on this page applies if you do.
What size water softener does a family of four need in Chesapeake?
About 24,000 grains. Four people at 75 gallons each per day remove 1,320 grains of hardness daily, or 9,240 grains between weekly regenerations, so the smallest standard unit that covers a week is 24,000 grains. Expect roughly 34.4 lb of salt a month at an efficient setting.
What hardness setting should my dishwasher use in Chesapeake?
Set it for 4.4 grains per gallon, or 4.2 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.
Where does Chesapeake's water come from?
City of Chesapeake Public Utilities supplies Chesapeake from surface water (rivers, lakes and reservoirs). Surface water has little contact with mineral-bearing rock, so its hardness mostly reflects the watershed's geology and tends to run lower and steadier than well water. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.
How does Chesapeake compare with other cities in Virginia?
Chesapeake ranks 4 of 9 Virginia cities listed here, hardest first, and is 10 ppm softer than the Virginia average of 85 ppm. Nationally it is softer than 69% of the 428 cities listed on this site; the median listed city is 125 ppm.
How This Page Works
- The hardness, pH, dissolved-solids, source and utility values are the figures reported by City of Chesapeake Public Utilities; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
- Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
- Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
- Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
- Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.