Water Hardness in Utah (UT)

Utah has an average water hardness of 290 ppm (17 grains per gallon), which is classified as Very Hard . Most households in Utah would benefit from a water softener to protect plumbing and appliances from mineral scale buildup. The estimated annual cost of untreated hard water for Utah households is approximately $13 per year in extra energy, cleaning products, and premature appliance wear. Water hardness varies between cities — from 200 ppm in Ogden to 380 ppm in St. George.

State Average 290 ppm 17 gpg
Hardness Level Very Hard Softener recommended
Hardest City St. George 380 ppm
Softest City Ogden 200 ppm

Water Hardness by City in Utah

The table below shows water hardness data for 9 cities in Utah, sorted from hardest to softest. Click any city name for detailed information including water source, treatment recommendations, and estimated hard water costs.

City Hardness (PPM) Grains/Gallon Level Water Source pH TDS Utility
St. George 380 ppm 22.2 gpg Very Hard Ground 8.2 620 City of St. George
West Jordan 310 ppm 18.1 gpg Very Hard Mixed 8 500 Jordan Valley Water Conservancy District
Provo 290 ppm 17 gpg Very Hard Ground 8 470 Provo City Water
Orem 280 ppm 16.4 gpg Very Hard Mixed 7.9 450 Orem City Public Works
Sandy 270 ppm 15.8 gpg Very Hard Mixed 7.9 440 Sandy City Public Utilities
Logan 260 ppm 15.2 gpg Very Hard Mixed 7.9 420 Logan City Light and Power
Layton 245 ppm 14.3 gpg Hard Mixed 7.8 395 Layton City Public Works
Salt Lake City 230 ppm 13.5 gpg Hard Mixed 7.8 370 Salt Lake City Department of Public Utilities
Ogden 200 ppm 11.7 gpg Hard Mixed 7.7 320 Ogden City Water Department
Ad Space

Understanding Water Hardness in Utah

Water Sources in Utah

Many cities in Utah rely on groundwater from wells and aquifers as their primary water source. Groundwater tends to be harder than surface water because it spends more time in contact with limestone, dolomite, and other mineral-rich rock formations deep underground. This prolonged contact allows more calcium and magnesium to dissolve into the water, resulting in higher hardness levels.

Hardness Variation Across Utah

Water hardness in Utah ranges from 200 ppm in Ogden to 380 ppm in St. George — a difference of 180 ppm. This variation means that treatment recommendations differ significantly between cities. Residents of St. George and other cities with hard water should seriously consider installing a water softener to protect their homes. At 380 ppm, the annual cost of hard water damage to appliances, plumbing, and increased cleaning product usage can easily exceed $17. Ogden has the softest water in the state, though at 200 ppm it still contains some dissolved minerals.

Recommended Treatment for Utah Water

Based on the average water hardness of 290 ppm in Utah, a water softener is recommended for most households. The most effective treatment options for Utah's water hardness level include:

How Utah Compares to Other States

Below is a comparison of Utah with five states that have similar average water hardness levels. Understanding how your state compares can help you gauge whether your water is typical for the region or unusually hard or soft.

State Avg Hardness Level Cities
Utah (UT) 290 ppm Very Hard 9
Indiana (IN) 280 ppm Very Hard 8
Kansas (KS) 300 ppm Very Hard 8
Arizona (AZ) 270 ppm Very Hard 10
Nebraska (NE) 250 ppm Hard 8
North Dakota (ND) 250 ppm Hard 8

Find Your City's Water Hardness

Use our water hardness lookup tool to find your specific city in Utah, or browse all 50 states to compare water hardness across the country. If your water is hard, visit our treatment solutions guide to find the right softener or conditioner for your home.