Water Hardness in Franklin, Tennessee

What 145 PPM Means for Your Home in Franklin

At 145 ppm, Franklin's water is moderately hard. This is the threshold where most homeowners begin to notice real effects: white scale buildup on faucets and showerheads, reduced soap lathering that leads to using more shampoo and detergent, spots on dishes even with rinse aid, and a chalky film on shower glass. Your water heater is beginning to accumulate mineral deposits that reduce its energy efficiency by 10 to 15 percent. A water softener or salt-free conditioner is worth considering at this level, particularly if you have a tank-style water heater, multiple bathrooms, or a large household that uses significant amounts of hot water.

Water Source and Treatment at City of Franklin Water Management

Franklin's water is supplied by City of Franklin Water Management and sourced primarily from underground aquifers accessed through deep wells. Groundwater has been naturally filtered through rock and soil, which makes it generally free of biological contaminants but higher in dissolved minerals. The 145 ppm hardness in Franklin results from water percolating through limestone, chalk, or dolomite formations underground, dissolving calcium and magnesium along the way. The water has a pH of 7.6, which is slightly alkaline, and total dissolved solids of 225 ppm (moderate).

Estimated Cost of Hard Water in Franklin

The Water Quality Association estimates that hard water costs the average household about 30 cents per grain per gallon per person per year in combined expenses from increased soap and detergent usage, reduced appliance efficiency, higher energy bills from scale-encrusted water heaters, and premature appliance and plumbing replacement. For a typical Franklin household of 2.5 people with water at 145 ppm (8.5 gpg), this translates to approximately $6 per year. Over 10 years, that adds up to $64 in avoidable costs — often more than the total cost of installing and operating a water softener.