Water Hardness in Watertown, South Dakota
Does Watertown have hard water?
Yes, very. This is among the harder municipal supplies in the country.
City of Watertown delivers water at 280 ppm (16.4 grains per gallon), which this site rates Very Hard and the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 30 ppm harder than the South Dakota average of 250 ppm, and harder than 86% of the 428 cities listed on this site.
280 PPM in Every Unit
Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Watertown reading expressed in each one.
| Unit | Watertown | Used by |
|---|---|---|
| mg/L as CaCO₃ (ppm) | 280 | Utility water-quality reports, USGS |
| Grains per gallon (gpg) | 16.4 | Softener sizing, most US dishwasher manuals, test strips |
| German degrees (°dH) | 15.7 | European-made dishwashers and coffee machines |
| French degrees (°fH) | 28 | Some filter and descaler instructions |
| mmol/L | 2.8 | Laboratory reports |
Dishwasher setting for Watertown: 16.4 gpg or 15.7 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.
What 280 PPM Does in a Watertown Home
At 280 ppm the supply is among the harder municipal water in the country. Scale restricts fixtures within a year or two, tankless heaters are at real risk of plugging, and bathing leaves skin and hair feeling dry. A softener is close to a necessity rather than an upgrade.
Water heaters
The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Watertown's 16.4 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.
| Appliance | Battelle finding | At 16.4 gpg |
|---|---|---|
| Gas storage heater, 50 gal hot water/day | 4% efficiency loss per 5 gpg over 15 years | 13% loss |
| Gas storage heater, 100 gal/day | 8% per 5 gpg, capped at the 48% measured at 30 gpg | 26% loss |
| Electric storage heater | 0.4 lb of scale per year per 5 gpg | 1.3 lb/year |
| Tankless gas heater | Plugged with scale after 1.6 years on 26 gpg water | Descale yearly or soften |
| Showerheads | Lost 75% of flow in under 18 months on hard water | Expect visible scaling within a year |
Laundry and dishes
Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Watertown: Use the label's heavy-soil or hard-water dose. Softening the water lets you drop back to the minimum dose.
Sizing a Water Softener for Watertown
Softener capacity is the grains of hardness a unit removes between regenerations. At 16.4 gpg, each person using 75 gallons a day adds about 1,230 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.
| Household | Grains/day | Grains/7 days | Suggested capacity | Salt/month |
|---|---|---|---|---|
| 2 people | 2,460 | 17,220 | 24,000 grain | ~34 lb |
| 3 people | 3,690 | 25,830 | 32,000 grain | ~46 lb |
| 4 people | 4,920 | 34,440 | 40,000 grain | ~57 lb |
| 5 people | 6,150 | 43,050 | 48,000 grain | ~69 lb |
Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.
Where Watertown's Water Comes From
City of Watertown supplies Watertown from groundwater drawn from wells. Groundwater picks up calcium and magnesium as it moves through limestone, dolomite and chalk, which is why well-fed systems are usually harder than river-fed ones.
The supply has a pH of 7.9, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 450 mg/L, below the EPA secondary standard of 500 mg/L but high enough to taste minerally. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.
The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.
Treatment Options for 280 PPM
Ranked for Watertown's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.
Other Cities in South Dakota
Watertown ranks 4 of 8 listed South Dakota cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Watertown | 280 ppm | 16.4 | Very Hard | Ground |
| Mitchell | 310 ppm | 18.1 | Very Hard | Ground |
| Aberdeen | 300 ppm | 17.5 | Very Hard | Ground |
| Huron | 290 ppm | 17 | Very Hard | Ground |
| Brookings | 260 ppm | 15.2 | Very Hard | Ground |
| Pierre | 230 ppm | 13.5 | Hard | Mixed |
| Sioux Falls | 220 ppm | 12.9 | Hard | Ground |
| Rapid City | 200 ppm | 11.7 | Hard | Mixed |
Frequently Asked Questions
Does Watertown have hard water?
Yes, very. This is among the harder municipal supplies in the country. Watertown's water measures 280 ppm (16.4 grains per gallon), which the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 30 ppm harder than the South Dakota average of 250 ppm and harder than 86% of the 428 cities listed on this site.
What is the water hardness in Watertown in grains per gallon?
16.4 grains per gallon. The same 280 mg/L reading is 15.7 German degrees (°dH), 28 French degrees (°fH) and 2.8 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.
Do I need a water softener in Watertown?
For most households, yes. At 280 ppm the Battelle Institute's water-heater study implies a gas storage heater loses roughly 13% of its efficiency over 15 years at 50 gallons of hot water a day and 26% at 100 gallons, and fixtures scale within months. A salt-based softener removes the hardness; a salt-free conditioner only limits where the scale sticks.
What size water softener does a family of four need in Watertown?
About 40,000 grains. Four people at 75 gallons each per day remove 4,920 grains of hardness daily, or 34,440 grains between weekly regenerations, so the smallest standard unit that covers a week is 40,000 grains. Expect roughly 57.2 lb of salt a month at an efficient setting.
What hardness setting should my dishwasher use in Watertown?
Set it for 16.4 grains per gallon, or 15.7 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.
Where does Watertown's water come from?
City of Watertown supplies Watertown from groundwater drawn from wells. Groundwater picks up calcium and magnesium as it moves through limestone, dolomite and chalk, which is why well-fed systems are usually harder than river-fed ones. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.
How does Watertown compare with other cities in South Dakota?
Watertown ranks 4 of 8 South Dakota cities listed here, hardest first, and is 30 ppm harder than the South Dakota average of 250 ppm. Nationally it is harder than 86% of the 428 cities listed on this site; the median listed city is 125 ppm.
How This Page Works
- The hardness, pH, dissolved-solids, source and utility values are the figures reported by City of Watertown; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
- Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
- Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
- Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
- Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.