Water Hardness in Myrtle Beach, South Carolina
The water hardness in Myrtle Beach, SC is 90 ppm (5.3 grains per gallon), which is classified as Slightly Hard . Water in Myrtle Beach is supplied by Grand Strand Water and Sewer Authority and comes primarily from underground aquifer and well water sources. While a water softener is not strictly necessary at this hardness level, some homeowners in Myrtle Beach opt for a conditioner to reduce minor spotting and improve soap performance.
Water Quality Details for Myrtle Beach, SC
What 90 PPM Means for Your Home in Myrtle Beach
At 90 ppm, Myrtle Beach's water is classified as slightly hard. You may notice minor water spots on dishes and glassware after they dry, and there might be a thin film on glass shower doors over time. However, these effects are cosmetic rather than damaging. Your plumbing and appliances are not at significant risk of scale damage at this level. Most households in Myrtle Beach operate perfectly well without a water softener. If the minor spotting bothers you, a simple rinse aid in your dishwasher or an occasional vinegar wipe on fixtures is usually sufficient. Some homeowners with sensitive skin or eczema may still prefer a softener for bathing comfort.
Water Source and Treatment at Grand Strand Water and Sewer Authority
Myrtle Beach's water is supplied by Grand Strand Water and Sewer Authority and sourced primarily from underground aquifers accessed through deep wells. Groundwater has been naturally filtered through rock and soil, which makes it generally free of biological contaminants but higher in dissolved minerals. The 90 ppm hardness in Myrtle Beach results from water percolating through limestone, chalk, or dolomite formations underground, dissolving calcium and magnesium along the way. The water has a pH of 7.4, which is near neutral, and total dissolved solids of 140 ppm (moderate).
Estimated Cost of Hard Water in Myrtle Beach
The Water Quality Association estimates that hard water costs the average household about 30 cents per grain per gallon per person per year in combined expenses from increased soap and detergent usage, reduced appliance efficiency, higher energy bills from scale-encrusted water heaters, and premature appliance and plumbing replacement. For a typical Myrtle Beach household of 2.5 people with water at 90 ppm (5.3 gpg), this translates to approximately $4 per year. Over 10 years, that adds up to $40 in avoidable costs — often more than the total cost of installing and operating a water softener.
Recommended Treatment Solutions for Myrtle Beach
Based on the water hardness of 90 ppm in Myrtle Beach, the following treatment options are recommended, ranked by effectiveness for your specific hardness level.
Other Cities in South Carolina
Compare Myrtle Beach's water hardness with other cities in South Carolina. Water hardness can vary significantly within a state depending on local geology and water sources.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Myrtle Beach | 90 ppm | 5.3 | Slightly Hard | Ground |
| Hilton Head | 85 ppm | 5 | Slightly Hard | Ground |
| Florence | 65 ppm | 3.8 | Slightly Hard | Ground |
| Charleston | 45 ppm | 2.6 | Soft | Surface |
| Columbia | 30 ppm | 1.8 | Soft | Surface |
| Rock Hill | 25 ppm | 1.5 | Soft | Surface |
| Greenville | 18 ppm | 1.1 | Soft | Surface |
| Spartanburg | 15 ppm | 0.9 | Soft | Surface |
Test Your Water for Accurate Results
The hardness value shown for Myrtle Beach (90 ppm) is based on the most recent available data from Grand Strand Water and Sewer Authority. Your actual water hardness may vary depending on your neighborhood, the age of your plumbing, and seasonal changes in water supply. For the most accurate measurement, we recommend testing your tap water with a home test kit or requesting a current water quality report from Grand Strand Water and Sewer Authority. Visit our hardness scale guide to understand what your test results mean, or explore all treatment solutions to find the right option for your home.