Water Hardness in Norman, Oklahoma
Does Norman have hard water?
Yes, moderately. Scale and spotting are noticeable but not damaging.
City of Norman Utilities delivers water at 160 ppm (9.4 grains per gallon), which this site rates Moderately Hard and the USGS classifies as hard (121–180 mg/L as calcium carbonate). That is 10 ppm softer than the Oklahoma average of 170 ppm, and harder than 60% of the 428 cities listed on this site.
160 PPM in Every Unit
Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Norman reading expressed in each one.
| Unit | Norman | Used by |
|---|---|---|
| mg/L as CaCO₃ (ppm) | 160 | Utility water-quality reports, USGS |
| Grains per gallon (gpg) | 9.4 | Softener sizing, most US dishwasher manuals, test strips |
| German degrees (°dH) | 9 | European-made dishwashers and coffee machines |
| French degrees (°fH) | 16 | Some filter and descaler instructions |
| mmol/L | 1.6 | Laboratory reports |
Dishwasher setting for Norman: 9.4 gpg or 9 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.
What 160 PPM Does in a Norman Home
At 160 ppm hardness becomes visible: white deposits on faucet aerators and showerheads, spotting that rinse aid only partly fixes, and the first measurable scale inside a tank water heater. Whether to treat it depends on how much hot water you use; the heater figures below show why.
Water heaters
The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Norman's 9.4 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.
| Appliance | Battelle finding | At 9.4 gpg |
|---|---|---|
| Gas storage heater, 50 gal hot water/day | 4% efficiency loss per 5 gpg over 15 years | 8% loss |
| Gas storage heater, 100 gal/day | 8% per 5 gpg, capped at the 48% measured at 30 gpg | 15% loss |
| Electric storage heater | 0.4 lb of scale per year per 5 gpg | 0.8 lb/year |
| Tankless gas heater | Plugged with scale after 1.6 years on 26 gpg water | Descale every 1–2 years |
| Showerheads | Lost 75% of flow in under 18 months on hard water | Expect visible scaling within a year |
Laundry and dishes
Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Norman: Use the label's 'hard water' dose, usually one step up, or the standard dose with softened water.
Sizing a Water Softener for Norman
Softener capacity is the grains of hardness a unit removes between regenerations. At 9.4 gpg, each person using 75 gallons a day adds about 705 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.
| Household | Grains/day | Grains/7 days | Suggested capacity | Salt/month |
|---|---|---|---|---|
| 2 people | 1,410 | 9,870 | 24,000 grain | ~34 lb |
| 3 people | 2,115 | 14,805 | 24,000 grain | ~34 lb |
| 4 people | 2,820 | 19,740 | 24,000 grain | ~34 lb |
| 5 people | 3,525 | 24,675 | 32,000 grain | ~46 lb |
Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.
Where Norman's Water Comes From
City of Norman Utilities supplies Norman from surface water (rivers, lakes and reservoirs). Surface water has little contact with mineral-bearing rock, so its hardness mostly reflects the watershed's geology and tends to run lower and steadier than well water.
The supply has a pH of 7.6, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 250 mg/L, well under the EPA secondary standard of 500 mg/L. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.
The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.
Treatment Options for 160 PPM
Ranked for Norman's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.
Salt-Based Water Softener
$800 - $2,500 Effectiveness: High Removes minerals Learn more →Salt-Free Water Conditioner
$1,000 - $3,000 Effectiveness: Moderate Conditions only Learn more →Reverse Osmosis System
$200 - $500 Effectiveness: High Removes minerals Learn more →Electronic Descaler
$150 - $400 Effectiveness: Moderate Conditions only Learn more →Other Cities in Oklahoma
Norman ranks 5 of 8 listed Oklahoma cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Norman | 160 ppm | 9.4 | Moderately Hard | Surface |
| Edmond | 240 ppm | 14 | Hard | Ground |
| Enid | 230 ppm | 13.5 | Hard | Ground |
| Lawton | 200 ppm | 11.7 | Hard | Surface |
| Stillwater | 175 ppm | 10.2 | Moderately Hard | Surface |
| Oklahoma City | 100 ppm | 5.8 | Slightly Hard | Surface |
| Broken Arrow | 90 ppm | 5.3 | Slightly Hard | Surface |
| Tulsa | 80 ppm | 4.7 | Slightly Hard | Surface |
Frequently Asked Questions
Does Norman have hard water?
Yes, moderately. Scale and spotting are noticeable but not damaging. Norman's water measures 160 ppm (9.4 grains per gallon), which the USGS classifies as hard (121–180 mg/L as calcium carbonate). That is 10 ppm softer than the Oklahoma average of 170 ppm and harder than 60% of the 428 cities listed on this site.
What is the water hardness in Norman in grains per gallon?
9.4 grains per gallon. The same 160 mg/L reading is 9 German degrees (°dH), 16 French degrees (°fH) and 1.6 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.
Do I need a water softener in Norman?
Not for protection. At 160 ppm scale builds slowly enough that a rinse aid and an occasional vinegar soak of aerators handle it. People who dislike spotting or have sensitive skin still choose one, and the sizing table on this page applies if you do.
What size water softener does a family of four need in Norman?
About 24,000 grains. Four people at 75 gallons each per day remove 2,820 grains of hardness daily, or 19,740 grains between weekly regenerations, so the smallest standard unit that covers a week is 24,000 grains. Expect roughly 34.4 lb of salt a month at an efficient setting.
What hardness setting should my dishwasher use in Norman?
Set it for 9.4 grains per gallon, or 9 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.
Where does Norman's water come from?
City of Norman Utilities supplies Norman from surface water (rivers, lakes and reservoirs). Surface water has little contact with mineral-bearing rock, so its hardness mostly reflects the watershed's geology and tends to run lower and steadier than well water. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.
How does Norman compare with other cities in Oklahoma?
Norman ranks 5 of 8 Oklahoma cities listed here, hardest first, and is 10 ppm softer than the Oklahoma average of 170 ppm. Nationally it is harder than 60% of the 428 cities listed on this site; the median listed city is 125 ppm.
How This Page Works
- The hardness, pH, dissolved-solids, source and utility values are the figures reported by City of Norman Utilities; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
- Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
- Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
- Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
- Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.