Water Hardness in Cedar Rapids, Iowa
Does Cedar Rapids have hard water?
Yes, very. This is among the harder municipal supplies in the country.
City of Cedar Rapids Utilities delivers water at 260 ppm (15.2 grains per gallon), which this site rates Very Hard and the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 20 ppm harder than the Iowa average of 240 ppm, and harder than 82% of the 428 cities listed on this site.
260 PPM in Every Unit
Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Cedar Rapids reading expressed in each one.
| Unit | Cedar Rapids | Used by |
|---|---|---|
| mg/L as CaCO₃ (ppm) | 260 | Utility water-quality reports, USGS |
| Grains per gallon (gpg) | 15.2 | Softener sizing, most US dishwasher manuals, test strips |
| German degrees (°dH) | 14.6 | European-made dishwashers and coffee machines |
| French degrees (°fH) | 26 | Some filter and descaler instructions |
| mmol/L | 2.6 | Laboratory reports |
Dishwasher setting for Cedar Rapids: 15.2 gpg or 14.6 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.
What 260 PPM Does in a Cedar Rapids Home
At 260 ppm the supply is among the harder municipal water in the country. Scale restricts fixtures within a year or two, tankless heaters are at real risk of plugging, and bathing leaves skin and hair feeling dry. A softener is close to a necessity rather than an upgrade.
Water heaters
The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Cedar Rapids's 15.2 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.
| Appliance | Battelle finding | At 15.2 gpg |
|---|---|---|
| Gas storage heater, 50 gal hot water/day | 4% efficiency loss per 5 gpg over 15 years | 12% loss |
| Gas storage heater, 100 gal/day | 8% per 5 gpg, capped at the 48% measured at 30 gpg | 24% loss |
| Electric storage heater | 0.4 lb of scale per year per 5 gpg | 1.2 lb/year |
| Tankless gas heater | Plugged with scale after 1.6 years on 26 gpg water | Descale yearly or soften |
| Showerheads | Lost 75% of flow in under 18 months on hard water | Expect visible scaling within a year |
Laundry and dishes
Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Cedar Rapids: Use the label's heavy-soil or hard-water dose. Softening the water lets you drop back to the minimum dose.
Sizing a Water Softener for Cedar Rapids
Softener capacity is the grains of hardness a unit removes between regenerations. At 15.2 gpg, each person using 75 gallons a day adds about 1,140 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.
| Household | Grains/day | Grains/7 days | Suggested capacity | Salt/month |
|---|---|---|---|---|
| 2 people | 2,280 | 15,960 | 24,000 grain | ~34 lb |
| 3 people | 3,420 | 23,940 | 24,000 grain | ~34 lb |
| 4 people | 4,560 | 31,920 | 32,000 grain | ~46 lb |
| 5 people | 5,700 | 39,900 | 40,000 grain | ~57 lb |
Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.
Where Cedar Rapids's Water Comes From
City of Cedar Rapids Utilities supplies Cedar Rapids from groundwater drawn from wells. Groundwater picks up calcium and magnesium as it moves through limestone, dolomite and chalk, which is why well-fed systems are usually harder than river-fed ones.
The supply has a pH of 7.8, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 420 mg/L, below the EPA secondary standard of 500 mg/L but high enough to taste minerally. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.
The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.
Treatment Options for 260 PPM
Ranked for Cedar Rapids's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.
Other Cities in Iowa
Cedar Rapids ranks 3 of 8 listed Iowa cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Cedar Rapids | 260 ppm | 15.2 | Very Hard | Ground |
| Iowa City | 280 ppm | 16.4 | Very Hard | Ground |
| Ames | 270 ppm | 15.8 | Very Hard | Ground |
| Davenport | 250 ppm | 14.6 | Hard | Surface |
| Waterloo | 230 ppm | 13.5 | Hard | Ground |
| Des Moines | 220 ppm | 12.9 | Hard | Surface |
| Sioux City | 200 ppm | 11.7 | Hard | Mixed |
| Council Bluffs | 190 ppm | 11.1 | Hard | Mixed |
Frequently Asked Questions
Does Cedar Rapids have hard water?
Yes, very. This is among the harder municipal supplies in the country. Cedar Rapids's water measures 260 ppm (15.2 grains per gallon), which the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 20 ppm harder than the Iowa average of 240 ppm and harder than 82% of the 428 cities listed on this site.
What is the water hardness in Cedar Rapids in grains per gallon?
15.2 grains per gallon. The same 260 mg/L reading is 14.6 German degrees (°dH), 26 French degrees (°fH) and 2.6 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.
Do I need a water softener in Cedar Rapids?
For most households, yes. At 260 ppm the Battelle Institute's water-heater study implies a gas storage heater loses roughly 12% of its efficiency over 15 years at 50 gallons of hot water a day and 24% at 100 gallons, and fixtures scale within months. A salt-based softener removes the hardness; a salt-free conditioner only limits where the scale sticks.
What size water softener does a family of four need in Cedar Rapids?
About 32,000 grains. Four people at 75 gallons each per day remove 4,560 grains of hardness daily, or 31,920 grains between weekly regenerations, so the smallest standard unit that covers a week is 32,000 grains. Expect roughly 46 lb of salt a month at an efficient setting.
What hardness setting should my dishwasher use in Cedar Rapids?
Set it for 15.2 grains per gallon, or 14.6 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.
Where does Cedar Rapids's water come from?
City of Cedar Rapids Utilities supplies Cedar Rapids from groundwater drawn from wells. Groundwater picks up calcium and magnesium as it moves through limestone, dolomite and chalk, which is why well-fed systems are usually harder than river-fed ones. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.
How does Cedar Rapids compare with other cities in Iowa?
Cedar Rapids ranks 3 of 8 Iowa cities listed here, hardest first, and is 20 ppm harder than the Iowa average of 240 ppm. Nationally it is harder than 82% of the 428 cities listed on this site; the median listed city is 125 ppm.
How This Page Works
- The hardness, pH, dissolved-solids, source and utility values are the figures reported by City of Cedar Rapids Utilities; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
- Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
- Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
- Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
- Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.