Skip to content

Water Hardness in Muncie, Indiana

Does Muncie have hard water?

Yes, very. This is among the harder municipal supplies in the country.

Indiana American Water delivers water at 310 ppm (18.1 grains per gallon), which this site rates Very Hard and the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 30 ppm harder than the Indiana average of 280 ppm, and harder than 93% of the 428 cities listed on this site.

Hardness 310 ppm 18.1 grains per gallon
USGS Class Very hard Softener recommended
Rank in IN 2 of 8 hardest first
Water Source Ground Indiana American Water

310 PPM in Every Unit

Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Muncie reading expressed in each one.

UnitMuncieUsed by
mg/L as CaCO₃ (ppm)310Utility water-quality reports, USGS
Grains per gallon (gpg)18.1Softener sizing, most US dishwasher manuals, test strips
German degrees (°dH)17.4European-made dishwashers and coffee machines
French degrees (°fH)31Some filter and descaler instructions
mmol/L3.1Laboratory reports

Dishwasher setting for Muncie: 18.1 gpg or 17.4 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.

What 310 PPM Does in a Muncie Home

At 310 ppm the supply is among the harder municipal water in the country. Scale restricts fixtures within a year or two, tankless heaters are at real risk of plugging, and bathing leaves skin and hair feeling dry. A softener is close to a necessity rather than an upgrade.

Water heaters

The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Muncie's 18.1 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.

ApplianceBattelle findingAt 18.1 gpg
Gas storage heater, 50 gal hot water/day4% efficiency loss per 5 gpg over 15 years14% loss
Gas storage heater, 100 gal/day8% per 5 gpg, capped at the 48% measured at 30 gpg29% loss
Electric storage heater0.4 lb of scale per year per 5 gpg1.4 lb/year
Tankless gas heaterPlugged with scale after 1.6 years on 26 gpg waterDescale yearly or soften
ShowerheadsLost 75% of flow in under 18 months on hard waterExpect visible scaling within a year

Laundry and dishes

Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Muncie: Use the label's heavy-soil or hard-water dose. Softening the water lets you drop back to the minimum dose.

Sizing a Water Softener for Muncie

Softener capacity is the grains of hardness a unit removes between regenerations. At 18.1 gpg, each person using 75 gallons a day adds about 1,358 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.

HouseholdGrains/dayGrains/7 daysSuggested capacitySalt/month
2 people 2,715 19,005 24,000 grain ~34 lb
3 people 4,073 28,511 32,000 grain ~46 lb
4 people 5,430 38,010 40,000 grain ~57 lb
5 people 6,788 47,516 48,000 grain ~69 lb

Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.

Where Muncie's Water Comes From

Indiana American Water supplies Muncie from groundwater drawn from wells. Groundwater picks up calcium and magnesium as it moves through limestone, dolomite and chalk, which is why well-fed systems are usually harder than river-fed ones.

The supply has a pH of 7.9, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 500 mg/L, below the EPA secondary standard of 500 mg/L but high enough to taste minerally. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.

The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.

Treatment Options for 310 PPM

Ranked for Muncie's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.

Other Cities in Indiana

Muncie ranks 2 of 8 listed Indiana cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.

CityHardness (PPM)GPGLevelSource
Muncie 310 ppm 18.1 Very Hard Ground
Carmel 320 ppm 18.7 Very Hard Ground
Fort Wayne 300 ppm 17.5 Very Hard Ground
South Bend 290 ppm 17 Very Hard Ground
Terre Haute 280 ppm 16.4 Very Hard Ground
Bloomington 270 ppm 15.8 Very Hard Surface
Indianapolis 260 ppm 15.2 Very Hard Mixed
Evansville 240 ppm 14 Hard Surface

Frequently Asked Questions

Does Muncie have hard water?

Yes, very. This is among the harder municipal supplies in the country. Muncie's water measures 310 ppm (18.1 grains per gallon), which the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 30 ppm harder than the Indiana average of 280 ppm and harder than 93% of the 428 cities listed on this site.

What is the water hardness in Muncie in grains per gallon?

18.1 grains per gallon. The same 310 mg/L reading is 17.4 German degrees (°dH), 31 French degrees (°fH) and 3.1 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.

Do I need a water softener in Muncie?

For most households, yes. At 310 ppm the Battelle Institute's water-heater study implies a gas storage heater loses roughly 14% of its efficiency over 15 years at 50 gallons of hot water a day and 29% at 100 gallons, and fixtures scale within months. A salt-based softener removes the hardness; a salt-free conditioner only limits where the scale sticks.

What size water softener does a family of four need in Muncie?

About 40,000 grains. Four people at 75 gallons each per day remove 5,430 grains of hardness daily, or 38,010 grains between weekly regenerations, so the smallest standard unit that covers a week is 40,000 grains. Expect roughly 57.2 lb of salt a month at an efficient setting.

What hardness setting should my dishwasher use in Muncie?

Set it for 18.1 grains per gallon, or 17.4 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.

Where does Muncie's water come from?

Indiana American Water supplies Muncie from groundwater drawn from wells. Groundwater picks up calcium and magnesium as it moves through limestone, dolomite and chalk, which is why well-fed systems are usually harder than river-fed ones. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.

How does Muncie compare with other cities in Indiana?

Muncie ranks 2 of 8 Indiana cities listed here, hardest first, and is 30 ppm harder than the Indiana average of 280 ppm. Nationally it is harder than 93% of the 428 cities listed on this site; the median listed city is 125 ppm.

How This Page Works

  • The hardness, pH, dissolved-solids, source and utility values are the figures reported by Indiana American Water; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
  • Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
  • Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
  • Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
  • Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.

Test & Treat Your Water

Find out exactly what's in your water and get the right solution.

Some links above are affiliate links — if you buy through them we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.