Skip to content

Water Hardness in Indianapolis, Indiana

Does Indianapolis have hard water?

Yes, very. This is among the harder municipal supplies in the country.

Citizens Water delivers water at 260 ppm (15.2 grains per gallon), which this site rates Very Hard and the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 20 ppm softer than the Indiana average of 280 ppm, and harder than 82% of the 428 cities listed on this site.

Hardness 260 ppm 15.2 grains per gallon
USGS Class Very hard Softener recommended
Rank in IN 7 of 8 hardest first
Water Source Mixed Citizens Water

260 PPM in Every Unit

Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Indianapolis reading expressed in each one.

UnitIndianapolisUsed by
mg/L as CaCO₃ (ppm)260Utility water-quality reports, USGS
Grains per gallon (gpg)15.2Softener sizing, most US dishwasher manuals, test strips
German degrees (°dH)14.6European-made dishwashers and coffee machines
French degrees (°fH)26Some filter and descaler instructions
mmol/L2.6Laboratory reports

Dishwasher setting for Indianapolis: 15.2 gpg or 14.6 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.

What 260 PPM Does in a Indianapolis Home

At 260 ppm the supply is among the harder municipal water in the country. Scale restricts fixtures within a year or two, tankless heaters are at real risk of plugging, and bathing leaves skin and hair feeling dry. A softener is close to a necessity rather than an upgrade.

Water heaters

The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Indianapolis's 15.2 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.

ApplianceBattelle findingAt 15.2 gpg
Gas storage heater, 50 gal hot water/day4% efficiency loss per 5 gpg over 15 years12% loss
Gas storage heater, 100 gal/day8% per 5 gpg, capped at the 48% measured at 30 gpg24% loss
Electric storage heater0.4 lb of scale per year per 5 gpg1.2 lb/year
Tankless gas heaterPlugged with scale after 1.6 years on 26 gpg waterDescale yearly or soften
ShowerheadsLost 75% of flow in under 18 months on hard waterExpect visible scaling within a year

Laundry and dishes

Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Indianapolis: Use the label's heavy-soil or hard-water dose. Softening the water lets you drop back to the minimum dose.

Sizing a Water Softener for Indianapolis

Softener capacity is the grains of hardness a unit removes between regenerations. At 15.2 gpg, each person using 75 gallons a day adds about 1,140 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.

HouseholdGrains/dayGrains/7 daysSuggested capacitySalt/month
2 people 2,280 15,960 24,000 grain ~34 lb
3 people 3,420 23,940 24,000 grain ~34 lb
4 people 4,560 31,920 32,000 grain ~46 lb
5 people 5,700 39,900 40,000 grain ~57 lb

Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.

Where Indianapolis's Water Comes From

Citizens Water supplies Indianapolis from a blend of surface water and groundwater. Blended systems shift between sources with season and demand, so hardness at the tap can swing by tens of ppm over a year even though the reported figure is a single average.

The supply has a pH of 7.8, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 420 mg/L, below the EPA secondary standard of 500 mg/L but high enough to taste minerally. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.

The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.

Treatment Options for 260 PPM

Ranked for Indianapolis's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.

Other Cities in Indiana

Indianapolis ranks 7 of 8 listed Indiana cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.

CityHardness (PPM)GPGLevelSource
Indianapolis 260 ppm 15.2 Very Hard Mixed
Carmel 320 ppm 18.7 Very Hard Ground
Muncie 310 ppm 18.1 Very Hard Ground
Fort Wayne 300 ppm 17.5 Very Hard Ground
South Bend 290 ppm 17 Very Hard Ground
Terre Haute 280 ppm 16.4 Very Hard Ground
Bloomington 270 ppm 15.8 Very Hard Surface
Evansville 240 ppm 14 Hard Surface

Frequently Asked Questions

Does Indianapolis have hard water?

Yes, very. This is among the harder municipal supplies in the country. Indianapolis's water measures 260 ppm (15.2 grains per gallon), which the USGS classifies as very hard (over 180 mg/L as calcium carbonate). That is 20 ppm softer than the Indiana average of 280 ppm and harder than 82% of the 428 cities listed on this site.

What is the water hardness in Indianapolis in grains per gallon?

15.2 grains per gallon. The same 260 mg/L reading is 14.6 German degrees (°dH), 26 French degrees (°fH) and 2.6 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.

Do I need a water softener in Indianapolis?

For most households, yes. At 260 ppm the Battelle Institute's water-heater study implies a gas storage heater loses roughly 12% of its efficiency over 15 years at 50 gallons of hot water a day and 24% at 100 gallons, and fixtures scale within months. A salt-based softener removes the hardness; a salt-free conditioner only limits where the scale sticks.

What size water softener does a family of four need in Indianapolis?

About 32,000 grains. Four people at 75 gallons each per day remove 4,560 grains of hardness daily, or 31,920 grains between weekly regenerations, so the smallest standard unit that covers a week is 32,000 grains. Expect roughly 46 lb of salt a month at an efficient setting.

What hardness setting should my dishwasher use in Indianapolis?

Set it for 15.2 grains per gallon, or 14.6 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.

Where does Indianapolis's water come from?

Citizens Water supplies Indianapolis from a blend of surface water and groundwater. Blended systems shift between sources with season and demand, so hardness at the tap can swing by tens of ppm over a year even though the reported figure is a single average. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.

How does Indianapolis compare with other cities in Indiana?

Indianapolis ranks 7 of 8 Indiana cities listed here, hardest first, and is 20 ppm softer than the Indiana average of 280 ppm. Nationally it is harder than 82% of the 428 cities listed on this site; the median listed city is 125 ppm.

How This Page Works

  • The hardness, pH, dissolved-solids, source and utility values are the figures reported by Citizens Water; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
  • Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
  • Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
  • Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
  • Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.

Test & Treat Your Water

Find out exactly what's in your water and get the right solution.

Some links above are affiliate links — if you buy through them we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.