Water Hardness in Idaho (ID)

Idaho has an average water hardness of 170 ppm (9.9 grains per gallon), which is classified as Moderately Hard . Water hardness at this level may cause noticeable scale buildup on fixtures and reduced soap lathering. Some Idaho households choose to install a water softener or conditioner for improved water quality, though it is not strictly necessary. Water hardness varies between cities — from 60 ppm in Coeur d'Alene to 240 ppm in Twin Falls.

State Average 170 ppm 9.9 gpg
Hardness Level Moderately Hard No softener needed
Hardest City Twin Falls 240 ppm
Softest City Coeur d'Alene 60 ppm

Water Hardness by City in Idaho

The table below shows water hardness data for 8 cities in Idaho, sorted from hardest to softest. Click any city name for detailed information including water source, treatment recommendations, and estimated hard water costs.

City Hardness (PPM) Grains/Gallon Level Water Source pH TDS Utility
Twin Falls 240 ppm 14 gpg Hard Ground 7.9 385 City of Twin Falls
Idaho Falls 210 ppm 12.3 gpg Hard Ground 7.9 340 City of Idaho Falls
Pocatello 200 ppm 11.7 gpg Hard Ground 7.7 320 City of Pocatello Water Department
Nampa 190 ppm 11.1 gpg Hard Ground 7.8 310 City of Nampa Public Works
Meridian 175 ppm 10.2 gpg Moderately Hard Ground 7.7 275 City of Meridian Public Works
Boise 130 ppm 7.6 gpg Moderately Hard Mixed 7.5 200 Boise Public Works
Lewiston 85 ppm 5 gpg Slightly Hard Surface 7.3 130 City of Lewiston
Coeur d'Alene 60 ppm 3.5 gpg Soft Surface 7.1 88 City of Coeur d'Alene Water Department
Ad Space

Understanding Water Hardness in Idaho

Water Sources in Idaho

Many cities in Idaho rely on groundwater from wells and aquifers as their primary water source. Groundwater tends to be harder than surface water because it spends more time in contact with limestone, dolomite, and other mineral-rich rock formations deep underground. This prolonged contact allows more calcium and magnesium to dissolve into the water, resulting in higher hardness levels.

Hardness Variation Across Idaho

Water hardness in Idaho ranges from 60 ppm in Coeur d'Alene to 240 ppm in Twin Falls — a difference of 180 ppm. This variation means that treatment recommendations differ significantly between cities. Residents of Twin Falls and other cities with hard water should seriously consider installing a water softener to protect their homes. At 240 ppm, the annual cost of hard water damage to appliances, plumbing, and increased cleaning product usage can easily exceed $11. Coeur d'Alene has the softest water in the state, though at 60 ppm it still contains some dissolved minerals.

Recommended Treatment for Idaho Water

Based on the average water hardness of 170 ppm in Idaho, a water softener is not strictly necessary, but some homeowners may prefer treated water. The most effective treatment options for Idaho's water hardness level include:

How Idaho Compares to Other States

Below is a comparison of Idaho with five states that have similar average water hardness levels. Understanding how your state compares can help you gauge whether your water is typical for the region or unusually hard or soft.

State Avg Hardness Level Cities
Idaho (ID) 170 ppm Moderately Hard 8
Colorado (CO) 170 ppm Moderately Hard 9
Oklahoma (OK) 170 ppm Moderately Hard 8
Missouri (MO) 160 ppm Moderately Hard 8
Montana (MT) 180 ppm Moderately Hard 8
Ohio (OH) 160 ppm Moderately Hard 9

Find Your City's Water Hardness

Use our water hardness lookup tool to find your specific city in Idaho, or browse all 50 states to compare water hardness across the country. If your water is hard, visit our treatment solutions guide to find the right softener or conditioner for your home.