Skip to content

Water Hardness in Huntsville, Alabama

Does Huntsville have hard water?

Mildly. The water is slightly hard, which most households never notice.

Huntsville Utilities delivers water at 120 ppm (7 grains per gallon), which this site rates Slightly Hard and the USGS classifies as moderately hard (61–120 mg/L as calcium carbonate). That is 20 ppm harder than the Alabama average of 100 ppm, and softer than 55% of the 428 cities listed on this site.

Hardness 120 ppm 7 grains per gallon
USGS Class Moderately hard Softener optional
Rank in AL 3 of 8 hardest first
Water Source Mixed Huntsville Utilities

120 PPM in Every Unit

Appliance manuals, test strips and utility reports each use a different hardness unit. These are the same Huntsville reading expressed in each one.

UnitHuntsvilleUsed by
mg/L as CaCO₃ (ppm)120Utility water-quality reports, USGS
Grains per gallon (gpg)7Softener sizing, most US dishwasher manuals, test strips
German degrees (°dH)6.7European-made dishwashers and coffee machines
French degrees (°fH)12Some filter and descaler instructions
mmol/L1.2Laboratory reports

Dishwasher setting for Huntsville: 7 gpg or 6.7 °dH, rounded up to the machine's nearest step. The USGS bands are soft 0–60, moderately hard 61–120, hard 121–180 and very hard above 180 mg/L; this site splits the top band at 250 to separate hard from very hard.

What 120 PPM Does in a Huntsville Home

At 120 ppm you may see faint spotting on glassware and a film on shower glass over months, but the plumbing and appliances are not at risk. A rinse aid in the dishwasher usually settles it; a softener is a comfort purchase here, not a protective one.

Water heaters

The clearest measured effects of hardness come from a 2009 study the Water Quality Research Foundation commissioned from the Battelle Institute. Scaled to Huntsville's 7 gpg, its gas storage-heater results work out as follows; softened water held full efficiency in the same tests.

ApplianceBattelle findingAt 7 gpg
Gas storage heater, 50 gal hot water/day4% efficiency loss per 5 gpg over 15 years6% loss
Gas storage heater, 100 gal/day8% per 5 gpg, capped at the 48% measured at 30 gpg11% loss
Electric storage heater0.4 lb of scale per year per 5 gpg0.6 lb/year
Tankless gas heaterPlugged with scale after 1.6 years on 26 gpg waterDescale every 1–2 years
ShowerheadsLost 75% of flow in under 18 months on hard waterExpect visible scaling within a year

Laundry and dishes

Hardness minerals bind with detergent before it can clean, which is why dose charts step up for hard water. For Huntsville: The label's standard dose is enough; extra detergent will not rinse out any better.

Sizing a Water Softener for Huntsville

Softener capacity is the grains of hardness a unit removes between regenerations. At 7 gpg, each person using 75 gallons a day adds about 525 grains daily. The table assumes one regeneration a week and an efficient salt setting of 1 lb per 3,000 grains.

HouseholdGrains/dayGrains/7 daysSuggested capacitySalt/month
2 people 1,050 7,350 24,000 grain ~34 lb
3 people 1,575 11,025 24,000 grain ~34 lb
4 people 2,100 14,700 24,000 grain ~34 lb
5 people 2,625 18,375 24,000 grain ~34 lb

Add iron at 1 gpg per 1 ppm of dissolved iron if your test shows any, and size up rather than down: a unit that regenerates less often uses less salt per grain removed.

Where Huntsville's Water Comes From

Huntsville Utilities supplies Huntsville from a blend of surface water and groundwater. Blended systems shift between sources with season and demand, so hardness at the tap can swing by tens of ppm over a year even though the reported figure is a single average.

The supply has a pH of 7.8, inside the EPA secondary range of 6.5–8.5, and total dissolved solids of 180 mg/L, well under the EPA secondary standard of 500 mg/L. Hardness is the largest part of dissolved solids in most municipal water, which is why the two tend to rise together.

The figure on this page is the utility's reported average. Blended systems vary by season and neighborhood, so for the current number check the utility's Consumer Confidence Report, which the EPA indexes at Find Your Local CCR, or test the tap with a strip kit.

Treatment Options for 120 PPM

Ranked for Huntsville's hardness level. Only the first group actually removes calcium and magnesium; conditioners and descalers change how scale behaves without lowering the reading.

Other Cities in Alabama

Huntsville ranks 3 of 8 listed Alabama cities, hardest first. Hardness tracks geology and source more than distance, so neighboring cities can differ widely.

CityHardness (PPM)GPGLevelSource
Huntsville 120 ppm 7 Slightly Hard Mixed
Dothan 180 ppm 10.5 Moderately Hard Ground
Decatur 145 ppm 8.5 Moderately Hard Surface
Auburn 65 ppm 3.8 Slightly Hard Ground
Birmingham 52 ppm 3 Soft Surface
Tuscaloosa 48 ppm 2.8 Soft Surface
Montgomery 38 ppm 2.2 Soft Surface
Mobile 34 ppm 2 Soft Surface

Frequently Asked Questions

Does Huntsville have hard water?

Mildly. The water is slightly hard, which most households never notice. Huntsville's water measures 120 ppm (7 grains per gallon), which the USGS classifies as moderately hard (61–120 mg/L as calcium carbonate). That is 20 ppm harder than the Alabama average of 100 ppm and softer than 55% of the 428 cities listed on this site.

What is the water hardness in Huntsville in grains per gallon?

7 grains per gallon. The same 120 mg/L reading is 6.7 German degrees (°dH), 12 French degrees (°fH) and 1.2 mmol/L; 1 grain per gallon equals 17.1 mg/L as calcium carbonate.

Do I need a water softener in Huntsville?

Not for protection. At 120 ppm scale builds slowly enough that a rinse aid and an occasional vinegar soak of aerators handle it. People who dislike spotting or have sensitive skin still choose one, and the sizing table on this page applies if you do.

What size water softener does a family of four need in Huntsville?

About 24,000 grains. Four people at 75 gallons each per day remove 2,100 grains of hardness daily, or 14,700 grains between weekly regenerations, so the smallest standard unit that covers a week is 24,000 grains. Expect roughly 34.4 lb of salt a month at an efficient setting.

What hardness setting should my dishwasher use in Huntsville?

Set it for 7 grains per gallon, or 6.7 °dH if the manual uses German degrees; most machines take the nearest step up. The setting controls how much rinse aid and, on models with a built-in softener, how much salt the machine uses.

Where does Huntsville's water come from?

Huntsville Utilities supplies Huntsville from a blend of surface water and groundwater. Blended systems shift between sources with season and demand, so hardness at the tap can swing by tens of ppm over a year even though the reported figure is a single average. The utility's annual Consumer Confidence Report lists the current hardness, pH and dissolved solids; the EPA keeps a finder for these reports.

How does Huntsville compare with other cities in Alabama?

Huntsville ranks 3 of 8 Alabama cities listed here, hardest first, and is 20 ppm harder than the Alabama average of 100 ppm. Nationally it is softer than 55% of the 428 cities listed on this site; the median listed city is 125 ppm.

How This Page Works

  • The hardness, pH, dissolved-solids, source and utility values are the figures reported by Huntsville Utilities; every other number on the page is arithmetic on them. The site's five-band scale (soft, slightly hard, moderately hard, hard, very hard) is shown alongside the four-band USGS classification.
  • Unit conversions use 17.1 mg/L per grain per gallon, 17.85 mg/L per °dH, 10 mg/L per °fH and 100.09 mg/L per mmol/L of calcium carbonate.
  • Softener sizing assumes 75 gallons per person per day, regeneration every 7 days, standard capacities from 24,000 to 80,000 grains and 1 lb of salt per 3,000 grains. A dealer will size from your meter and a tap test.
  • Water-heater figures scale the Battelle Institute's 2009 per-5-gpg results linearly to this city's hardness and cap at the 48% loss Battelle measured at 30 gpg; the study ran 90-day accelerated tests, not 15 real years.
  • Sources: USGS Water Science School, Hardness of Water (classification bands); Water Quality Research Foundation, Battelle study release, April 13 2010 and WQA's Softened Water Benefits Studies page; US EPA, Secondary Drinking Water Standards (TDS 500 mg/L, pH 6.5–8.5) and Consumer Confidence Reports.

Test & Treat Your Water

Find out exactly what's in your water and get the right solution.

Some links above are affiliate links — if you buy through them we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.